911 GT3 992.2 Salzburg Tribute Livery Wrap Kit — Red & White

The complete Salzburg scheme as a pre-cut white vinyl kit for a red car. Two wide white stripes run the length of the bonnet from the nose, leaving a red gap down the centre line between them, then continue out across the tops of both front wings and taper as they meet the base of the windscreen. A single wide white stripe runs down the centre of the roof, and a white stripe crosses the upper surface of the rear wing. Along each flank, a wide white horizontal band runs from the front of the door rearwards across the door and rear quarter, stopping just before the rear bumper, with panel where the car carries its branding. Two white door roundels are included with empty centres, plus a set of black numerals so you can build the number 23 or your own. The graphics are supplied free of third-party branding, and we can cut your own lettering or numbers to size on request. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, with application tape, a felt-edge squeegee, alignment guides for the twin stripes and a fitting guide. Fits the 992.1 and 992.2 GT3, which share these panels. Around 7 hours of work.