911 GT3 992.2 Velocity Tribute Bonnet & Roof Livery Wrap Kit — Blue & White

The upper half of the Velocity livery as a pre-cut white vinyl set for a blue car. Includes the wide bonnet wedge that starts broad at the base of the windscreen and tapers to a point at the nose, the solid white block that sits on the lower front bumper, the wedge that continues out across the tops of both front wings, and the two thick parallel white stripes that run the full length of the roof from the windscreen to the engine deck. Also supplied are white overlay panels for the rear wing endplates and the upper wing surfaces to match the car. Every graphic is supplied blank with no lettering or numbers, so you decide whether to add anything. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, supplied with application tape, a felt-edge squeegee, alignment guides that keep the roof stripes parallel and a step-by-step fitting guide. The 992.1 and 992.2 GT3 share the bonnet, roof and wing profile closely enough that this kit suits both. Around 6 hours of work; the roof stripes are the slow part, so work in a warm, dust-free space.