956 KH Marlboro Tribute Livery Kit — White & Red

The complete white and red layout from the Silverstone 956 KH, cut for a white car. A large solid red wedge chevron goes on the upper centre of the nose, pointing forward towards the air dam. A red sweep leaves each side of the bonnet and wraps out over the tops of the front wheel arches, tapering away along the fenders. A solid red block runs along the lower rear flank on each side, from just behind the door over the rear wheel arch and back to the tail, and the rear bodywork and the vertical rear wing endplates are red as well. The top of the rear wing is supplied white with a blank red block for its leading edge. Also included are the blank white lettering panels for the nose, the rear flank and the wing, the blank black number panels for the doors with white numerals to build the number 8, and the small blank sponsor panels for the air dam and below the cockpit windows. Every panel is supplied blank, so no tobacco or sponsor artwork is reproduced: you add your own lettering, or we cut your wording into the blank panels on request. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, with application tape, a felt-edge squeegee, alignment guides for the chevron and the wing sweeps and a fitting guide. Fits the 956 and 956K bodywork. Around 4 hours of work.