956 KH Marlboro Tribute Wing Sweep & Rear Flank Kit

The flank graphics from the Silverstone 956 KH as a mirrored pair. A solid red sweep leaves the edge of the bonnet and wraps out over the top of each front wheel arch, tapering to a point along the front fender, cut so the taper follows the arch rather than running as a straight band across it. On the lower rear flank, a solid red block runs from just behind the door over the rear wheel arch and back to the tail light area, with a blank white lettering panel set inside it where the car shows its wording, so you can leave it plain or add your own. A blank black number panel with an empty white-centred space is included for each door. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, thin enough to lay flat over the arch lips and the shut lines, supplied with application tape, a felt-edge squeegee, tape-line guides for the sweep angle and a fitting guide. Fits the 956 and 956K bodywork. Around 2.5 hours of work.