911 992.2 Spirit 70 Door Roundel & Lower Flank Stripe Kit

The flank graphics from the Spirit 70 Heritage Design car, supplied as a mirrored pair for an orange 992.2. Each side gets a large circular black roundel cut to sit on the door panel, positioned clear of the handle and the shut line, with a blank white centre for your own number and numerals included to build 70. Below it a horizontal black stripe runs along the lower half of the door and continues rearward along the rocker panel towards the rear wheel arch, tapering slightly as it follows the sill line so it reads as one continuous band. Set inside the stripe is a blank elongated white panel for lettering, which you can leave plain, letter yourself, or have us cut with your wording. Both sides are cut as a matched pair, and a paper template sets the front edge of each stripe at the same distance from the door shut line, which is the part that shows when a pair is applied by eye. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, thin enough to lay flat along the rocker and turn the door edge, supplied with application tape, a felt-edge squeegee and a fitting guide. Fits the 992.2 cabriolet body. Around 2 hours of work.