911 RSR 930 Kremer Rally Tribute Graphics Kit — Silver, Red, Yellow & Purple

The Kremer-prepared 1973 RSR rally scheme, cut for a classic silver 911. The centrepiece is the centreline band: three parallel longitudinal stripes running red on the outer edge, yellow through the middle and purple as the innermost line, spaced evenly and close enough together to read as one band. It is supplied in panel-length sections so the lines stay straight over every panel gap, running from the front valance and bumper up over the whole bonnet, across the roof and away down the engine lid to the ducktail spoiler. The flank stripe block is the second part: a stacked horizontal stripe along the lower door and sill made of a thin red stripe, a wider yellow stripe and a thin purple stripe, with a black panel set inside it for the door lettering. Black wraps are supplied for the window surrounds and a black front valance trim strip. Every panel is blank, including the door lettering panel, the door roundels, the windscreen banner and the rear deck panels, so no branding or race number is reproduced: you add your own, or we cut your lettering and number for you. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, thin enough to follow the flared arches and the ducktail edges, supplied with application tape, a felt-edge squeegee, a centreline template for the tri-band and tape-line guides for the flank stripes, and a fitting guide. Fits the 1973 RSR and the 930-era classic 911 bodies. Around 5 hours of work.