911 GT3 RS 992 Test Track Flank Kit — Black Door & Orange Wedge

The flank of the grey and orange test track 992 GT3 RS, supplied as a mirrored pair for a car that is already grey. Each side gets the gloss black lower body wrap, cut to run from the front arch back along the skirt and up over the lower door, so the grey and black break line sits along the crease. On top of it goes the orange wedge, supplied as its own panel with a pointed leading edge and a straight trailing edge, sweeping up from the sill across the black door, together with the thin white accent line that follows the wedge on each side. The white tapering pinstripes that run diagonally backwards over the rear wheel arch are included at full length so they can be cut to the arch on the car, and black wraps for the side skirt and the rear vent surround are included. The door above the wedge is left plain and blank, with no lettering or number reproduced, so you can run the car clean or add your own wording or number. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, thin enough for the skirt lip, the vent edges and the arch flare, supplied with application tape, a felt-edge squeegee, tape-line guides for the wedge angle and the pinstripe direction, and a fitting guide. Fits the 992 GT3 RS body. Around 3 hours of work.