Vision 357 Speedster Miami Blue Flank Kit — Split Trim, Arch Pinstripes & 75

The flank detail from the Vision 357 Speedster, supplied as a mirrored pair for a car that already has its two-tone bodywork done. Each side gets the Miami Blue pinstripe that outlines the front and rear wheel arch edges, pre-cut as continuous strips so they follow the curve of the arch without kinking rather than being run from straight tape, plus a thin blue trim line that follows the two-tone split along the door and rear quarter. The number detail is included as bright blue numerals to build 75, sized for the door on both sides, together with blank blue rectangular panels in two sizes if you would rather run the car clean or set your own wording inside a panel. A short blue accent strip is included for the lower rear quarter. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, thin enough for the arch edges and the split line, supplied with application tape, a felt-edge squeegee, transfer tweezers for the numerals and pinstripes, a paper pattern for the arch curves, and a fitting guide. Fits the Vision 357 Speedster concept body. Around 2 hours of work.