911 Dakar 992 Martini Livery Wrap Kit — Sweeping Blue, Red & Blue Bands

The Martini Racing tribute scheme on the white 911 Dakar, cut as one coordinated kit. It is not a lower rocker stripe: the graphic is a band of three parallel stripes in light blue, red and light blue that starts on the bonnet, curves out over the front wheel arches and sweeps across the flank, rising as it runs backwards so it is at its widest over the rear haunch, then terminates near the engine lid. That widening sweep is why the kit is supplied as separate cut panels per section rather than one tape line, with each panel carrying the stripe order in the right sequence and a paper pattern setting the curve over the arch and up the haunch. The bonnet carries two sets of thin light-blue and red pinstripes running longitudinally back towards the base of the windscreen, and the same thin pairs are supplied for the roof gutters where they continue towards the rear deck. The door detail is included as blank white rounded field panels, cut to the shape of the white space the stripes frame, with black numerals to build the number 14 sized for the middle of that field so you can run the number or leave the door plain. Satin black wraps are supplied for the engine lid louvres and the lower rear bumper and diffuser, and thin white trim strips for the arch extensions. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, thin enough for the arch lips and the gutter edges, supplied with application tape, a felt-edge squeegee, tape-line guides for the stripe order and the sweep angle, and a fitting guide. Fits the 992 911 Dakar body. Around 6 hours of work.