935 K3V No.42 Bisimoto Livery Wrap Kit — Slate Grey with Neon Pink Panels

The slate grey and neon pink scheme from the No.42 935 K3V, cut as one coordinated kit. The base is Glasurit slate metallic grey and the pink is applied as solid block panels rather than stripes, so the kit is grouped into four graphic blocks, each supplied as its own pre-cut panel with tape-line guides for its edges. The largest covers the centre of the bonnet, shaped to sit inside the bonnet crown with its leading and trailing edges following the panel rather than running straight across it. The second covers the whole roof section, cut to run into the gutters on both sides. The third wraps the rear engine cover and deck and runs back into the base of the wing, and the fourth is a horizontal rectangular block applied above each rear wheel arch on the rear quarters. The wing itself is supplied in black for the blade and both tall endplates, with blank panels on the endplates left empty for your own lettering, and the door markings are supplied as blank neon pink circular roundels with black numerals to build the number 42 at door size so the number can be run or the roundel left clean. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, thin enough for the louvre edges and the wing endplate returns, supplied with application tape, a felt-edge squeegee, tape-line guides for every panel edge, and a fitting guide. Fits the 935 K3V body. Around 6 hours of work.