911 Dakar 992 Martini Bonnet & Roof Stripe Kit — Blue and Red Pinstripe Pairs

The long pinstripe runs from the Martini tribute 911 Dakar, for a car whose flank graphics are already done. Two pairs are supplied, one light blue and one red, cut as long straight lengths with a small allowance so they can be trimmed at the leading edge of the bonnet and again where they meet the base of the windscreen. They run the length of the bonnet, spaced so a clear white gap separates the sets rather than butting them together, and a second pair of pre-cut gutter lengths is included in each colour so the lines continue back along the roof gutters towards the rear deck. Short pre-angled sections are supplied for the transition where the bonnet lines turn into the gutter run, which is the one place the lines cannot be run as straight tape without a kink. The kit also includes a spare set of each colour for trimming mistakes and thin white trim strips for the arch lip, plus a paper spacing guide so both sides of the bonnet sit at matching widths. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, supplied with application tape, a felt-edge squeegee, transfer tweezers, tape-line guides and a fitting guide. Fits the 992 911 Dakar body. Around 2 hours of work.