911 RSR 930 Kremer Tri-Colour Centre Stripe Kit

The centreline band from the Kremer 1973 RSR rally car on its own, for a silver car that needs only the stripe. The band is three parallel longitudinal stripes: red on the outer edge, yellow through the middle and purple as the innermost line, spaced evenly and close enough together to read as one graphic rather than three separate stripes. It is supplied in panel-length sections so the lines stay straight across the bonnet, roof, engine lid and ducktail panel gaps, and each section is cut with a small overhang at the ends so the three lines can be set together and trimmed on the car. The set runs from the front valance and bumper, up over the bonnet, across the roof, down the engine lid and onto the ducktail spoiler, with an extra short pair of sections for the valance and the spoiler face. windscreen banner is included, cut to the width of the glass, and a paper centreline template marks the middle of the car for the band. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, supplied with application tape, a felt-edge squeegee, tape-line guides for the three-stripe spacing and a fitting guide. Fits the 1973 RSR and the 930-era classic 911 bodies. Around 2 hours of work.