935 K3V Front End Kit — Black Splitter, Pink Bonnet Panel & Intake Surrounds

The front end of the No.42 935 K3V, for a car whose bodywork is already in pink and slate grey. The centre of the bonnet is covered by a broad neon pink panel that tapers forward into the leading edge of the nose, supplied as one pre-cut piece with tape-line guides along both edges so the taper stays symmetrical from the windscreen base to the front shut line. The splitter is wrapped in gloss black, cut to the splitter outline with an allowance to fold under the leading edge, and the two deep intake surrounds behind it are supplied as black wraps with their inner returns included so no grey shows at the edge. Thin black dive plane trims run back from the splitter corners along the lower wing. A neon pink circular surround marks the tow-eye position above the splitter on one side, the single round element on the front end. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, supplied with application tape, a felt-edge squeegee, tape-line guides, a trim guide for the splitter fold and a fitting guide. Fits the 935 K3V body. Around 2.5 hours of work.