956 KH Marlboro Tribute Wing Sweep & Rear Flank Kit

The flank graphics from the Silverstone 956 KH as a mirrored pair. A solid red sweep leaves the edge of the bonnet and wraps out over the top of each front wheel arch, tapering to a point along the front fender, cut so the taper follows the arch rather than running as a straight band across it. On the lower rear flank, a solid red block runs from just behind the door over the rear wheel arch and back to the tail light area, with lettering panel set inside it where the car shows its wording. number panel with an empty white-centred space is included for each door. Cut from 3M 2080 Series cast film with a 7-year outdoor durability rating, thin enough to lay flat over the arch lips and the shut lines, supplied with application tape, a felt-edge squeegee, tape-line guides for the sweep angle and a fitting guide. Fits the 956 and 956K bodywork. Around 2.5 hours of work.